OJO AL REGLAMENTO
Proporción de Medidas en Planta de Edificaciones I
En esta oportunidad, analizaremos juntos unas importantes recomendaciones dadas por nuestra Norma Técnica E-070 sobre algunos requisitos que hay que considerar antes de construirse una edificación, por ejemplo, una casa.
En su artículo 15.3 dice lo siguiente:
"CONFIGURACIÓN DEL EDIFICIO
La configuración de los edificios con diafragma rígido debe tender a lograr: Proporciones entre las dimensiones mayor y menor, que en planta estén comprendidas entre 1 a 4 ……"
Empezaremos explicando que configuración no es más que la disposición de cada una de las partes de la vivienda, lo cual le dan su forma, tamaño y, además, le otorgan algunas de sus propiedades; por ejemplo: sus propiedades sismo-resistentes. En otras palabras, una vivienda tendrá una buena capacidad resistente a los sismos y otras no tan buenas, dependiendo de cuál sea la forma de la misma. En el artículo “Ojo al reglamento” de tu Boletín N° 31, encontrarás más información sobre este concepto.
Por otro lado, el concepto de diafragma rígido ya lo explicamos en el articulo “Ojo al reglamento” de tu Boletín N° 21, por lo que deberás estudiarlo antes de entrar al tema central de este artículo.
Desde hace mucho tiempo, los ingenieros han aceptado que la configuración del edificio tiene un efecto significativo en su comportamiento durante los sismos. En efecto, en pasados terremotos ocurridos en nuestro país, se ha visto que edificaciones con geometrías irregulares o asimétricas han manifestado un deficiente comportamiento; en la actualidad se continúa viendo el uso de configuraciones riesgosas.
La configuración de la edificación debe ser sencilla, tanto en planta como en elevación. Las formas complejas, e irregulares causan un deficiente comportamiento cuando la edificación es sometida a la acción de fuerzas externas que producen los sismos o vientos.
Uno de los factores que contribuyen a darle formas sencillas y regulares a una edificación, es el que establece la Norma E-070; la cual consiste en procurar que la geometría en planta sea lo más rectangular posible, procurando que el lado largo no sea más de cuatro veces el lado corto (Fig. N° 1).
Edificaciones cuya relación de sus medidas en planta exceden a 4 (Fig. N° 2 y 3), no son recomendables, puesto que una de sus consecuencias es que los techos de concreto armado funcionan como diafragmas flexibles y no rígidos, que es lo que se requiere para que la edificación tenga un buen comportamiento estructural (ver Boletín N° 21); lo que trae por consecuencia aumentar la vulnerabilidad de la edificación. Se entiende por vulnerabilidad la susceptibilidad de la vivienda a sufrir daños estructurales en caso de eventos extremos como sismos
No olvidar que los diafragmas, conocidos como losas de entrepiso, son sistemas horizontales que resisten fuerzas paralelas a su plano; tales como las fuerzas sísmicas o fuerzas de viento, transmitiéndolas directamente a los elementos verticales; ya sean las columnas o muros portantes, elementos que le proporcionan una restricción ante este tipo de fuerzas.
Los esfuerzos causados por variaciones de temperatura o provocados por sismos son mayores en edificios con grandes dimensiones en planta.
En el caso que el largo de la edificación sea mayor a 4 veces su ancho, lo que se debe considerar es la aplicación de juntas de separación, de tal manera que se configure en bloques independientes adyacentes (Fig. N° 4), de forma que el movimiento de uno (debido a los efectos de un sismo) se produzca de manera independiente del otro.
Aceros Arequipa S.A. Corporation
Av. Antonio Miró Quesada
N.° 425, piso 17, Magdalena del Mar.
517-1800
Carretera Panamericana Sur Km 241. Paracas. Pisco - Ica
Variante de Uchumayo Km 5.5, Cerro Colorado, Arequipa
Av. Tupac Amaru 1620 AA.HH. Alto Mochica II, la Esperanza, Trujillo
Sector Coscobamba, Carretera Piura - Paita S/N Lote 5A Piura - Piura - Veintiséis de Octubre
Aceros del Altiplano S.R.L. Corporation
Urb. Parque Industrial Latinoamericano, Unidad Industrial UI 06,Mz. 1, lote 4 - Warnes.
Calle E - Lote 14 manzano A-08 Urbanización Cervecería Boliviana Nacional - Bellavista Viacha.
Calle Tte. Monasterios S/N Zona La Maica - Cochabamba.
ACEROS AMÉRICA S.A.S.
Cra 25 #13 – 117
Parcelación Industrial la Y. Yumbo
Aceros Arequipa AA S.AS Corporation.
Barrio Ficas Delia Vía Durán Tampo KM. 8.5 Durán - Guayas - Ecuador
ACEROS AMÉRICA SpA
Sucursal: COST ORIENTE RUTA 26, #S/N NUDO URIBE - ANTOFAGASTA
Usa
13838 Harllee Rd., Palmetto, FL 34221
+1 (941) 722-5566
2550 Ave N, St. Petersburg, FL 33713
+1 (727) 321-5878
In Aceros Arequipa S.A. (hereinafter, "Aceros Arequipa") we believe in the importance of communicating our ideas and do it in a transparent manner. so these terms will allow users of our website and / or any of our applications know the terms under which these services are used made available on our digital platform. By using the digital services made available by Aceros Arequipa, you accept the conditions described in this document and in the privacy policies, as well as in the other terms published in order to make you aware of your rights and duties when using any of these elements that we make available to you.
2. Aims and purpose.The purpose of our efforts developed on our digital platforms is to let you know the information to which you have access. This information is published and made available to you for your use under the conditions expressed in this document and the data that you authorize to use are all those that correspond to your personal data.
3. Use of our services.The services we make available to you must be used in good faith and in accordance with the following guidelines:
• They must be used properly and in good faith.
• You must only access our services using the user interfaces provided by our company.
• Any attempt to interfere with such services by any means is prohibited.
• If we detect manually or through the use of our electronic security systems that any user is attempting to use these services inappropriately, our company may block the user and deny access to them without restriction.
• The use of our platform does not make you the owner of any of the elements that make it up.
• All the elements that make up our services, whether they are configuration and/or programming codes, as well as the published content elements, are the property of Aceros Arequipa or of those who are authorized to use them by means of an agreement.
• None of our services should be used in any way that could infringe a current rule, or is contrary to morality or decency.
Some of the services provided on the digital platform may require the entry and therefore the delivery of personal data, before accessing them. In these cases you agree to provide truthful information or simply not use such services. In the event that you are required to create a username and password, you are responsible for your password and the proper care of it. Our company is not responsible for any action that may be taken using your password on our systems if you have failed to comply with this obligation.
We are respectful of the law and, therefore, of the protection of your personal information which is done in accordance with the provisions relating to the law 1581 of 2012, which corresponds to the protection and management of personal data. As well as all those rules that involve the development of the same. For more information related to the way in which Aceros Arequipa protects the information and personal data of users, you can enter the following link and view the privacy policies of the information: View cookie policies
5. Contents used.Our services make available to you a large amount of content in digital format, whether text, images, videos, or other content that we may deem appropriate to use. The ownership of the copyright published in any of these services belongs to Aceros Arequipa, its customers, suppliers or third parties that may have authorized us to use these contents.
Under no circumstances may any user appropriate, claim as their own or claim ownership of any of these contents. In case you consider that any of the contents published by us is violating any rule of copyright and / or industrial property you can use the comment system to let us know. The comment must have contact details and identification of the user in order to contact you and make the clarification to the claim filed.
6. Improvements and modifications.Aceros Arequipa constantly modifies and improves the characteristics of the services it provides on its digital platform. For this reason it is possible that some services may be modified over time and others may be restricted or even eliminated.
You may stop using any of our services at any time, just as we may modify or discontinue providing them.
7. Modification of these Terms and Conditions.Any modification, update or extension produced in these Terms and Conditions will be immediately published, being the responsibility of the User to review the Terms and Conditions in force at the time of navigation. The use by users of the site or Aceros Arequipa is considered as irrevocable acceptance of such revisions.
Date of last update: 27/08/2021.